ADDAC’s New Rotary Exciter & Resonator Clamps: These Two Guitar Clamps Could Completely Change How You Play

Guitarists have been chasing infinite sustain and otherworldly textures for decades — usually with pedals, E-bows, or elaborate studio setups. ADDAC System, the Portuguese experimental hardware company, just launched a pair of clamp-on accessories that attack the problem from a completely different angle. Meet the ADDAC Rotary Exciter & Resonator Clamps, and yes, they’re as weird and wonderful as they sound.

Here’s the short version: one unit magnetizes your strings from the outside. The other turns your guitar’s body into a speaker. Together they open up drone, ambient, and feedback territory that no pedal can quite reach — because they’re working directly on the instrument itself.

The Two Units, Broken Down

ADDAC006
Rotary Exciter Clamp
€120
  • Clamps near the neck joint
  • 7,000 RPM brushless motor
  • Rotating magnetic field excites strings
  • Speed knob for non-linear control
  • Standard 9V DC pedalboard power
  • Includes 5m extension cable
ADDAC007
Resonator Clamp
€200
  • Attaches to the headstock
  • Standard model: up to 20mm thick
  • ADDAC007W: up to 45mm thick
  • Accepts modular or line-level audio
  • Guitar body becomes a resonator
  • Needs dedicated 9–12V DC at 3A

How Do They Actually Work?

The Rotary Exciter

The ADDAC006 spins a brushless motor at up to 7,000 RPM. That motor creates a shifting magnetic field around your strings — and when that rotation lines up with a string’s natural resonant frequency, the string starts vibrating on its own. Adjust the speed, retune, or move the clamp’s position, and the harmonics shift. It’s similar to an E-bow in concept, but it affects all your strings simultaneously and runs hands-free.

Add a good reverb pedal or some modulation after it and you’ve got textures that sound genuinely unhinged — in the best possible way.

The Resonator Clamp

The ADDAC007 is a transducer that feeds an external audio signal — a synth pad, a piano sample, even a whole mix — directly into the body of the guitar. The instrument physically vibrates at those frequencies. Your pickups capture the result. The guitar’s tuning, which strings you mute, and where the clamp sits on the headstock all shape which harmonics come through. It’s your guitar’s body as a living filter.

“A slight change in position can result in very different sounds.”

— ADDAC System on the Resonator Clamp placement

That’s not vagueness — it’s genuinely part of the instrument. Slight headstock repositioning shifts which overtones bloom and which disappear. That kind of physical experimentation is something no effects pedal can fully replicate.

What ADDAC Isn’t Telling You

The marketing is sparse, and there’s a reason for that — this gear is genuinely hard to demo in a press release. You can’t hear magnetic resonance through a specsheet. What ADDAC isn’t spelling out clearly: the Resonator Clamp needs a 3A power supply, which is beefy for a pedalboard. Most standard one-spot adapters won’t cut it. Budget for a dedicated brick if you’re going live with this.

The Rotary Exciter’s real-world failure point? Guitar type matters enormously. Single-coil pickups react differently than humbuckers. The motor speed interacts with 60Hz vs 50Hz environments. ADDAC gives you a knob and tells you to experiment — which is honest, but also means your first hour with this will be very hands-on.

Heads up: Don’t overtighten the clamps. Both units use felt padding to protect your finish, but over-clamping can still mar a lacquer finish over time. Check the current manual for clamping guidelines before mounting.

How Does It Compare?

If you already own an E-bow, the Rotary Exciter isn’t a replacement — it’s a different animal. An E-bow gives you one sustained string with control over attack. The ADDAC006 gives you all strings, simultaneously, with a rotating effect that evolves over time. It’s closer to a looper-and-sustainer workflow than a standard E-bow technique.

If you’re running a Fernandes Sustainer system, the Exciter Clamp won’t blow your mind — the concept is similar. But if you’ve never owned anything like this and you’re curious about experimental guitar textures, €120 is a remarkably low entry point for this kind of ambient territory.

The Resonator is harder to compare because almost nothing does what it does at this price. The closest analogue is a prepared-piano technique applied to guitar — the instrument becomes a filter and resonator rather than a sound source. For producers interested in unconventional recording approaches, this is genuinely novel.


Who Should Actually Buy This?

✓ Buy this if… ✗ Skip this if…
You make ambient, drone, or experimental music You need predictable, repeatable results every time
You want textures no pedal chain can produce You’re a touring musician with a tight, locked-in signal chain
You record at home and love deep experimentation You already own a Fernandes Sustainer (Exciter overlap)
You want to blend synth sounds into your guitar body Your headstock is thicker than 20mm and the 007W is sold out
You love ADDAC’s modular world and want it on guitar You’re a bedroom producer happy with plugins alone

The Bottom Line

The ADDAC Rotary Exciter & Resonator Clamps aren’t for everyone — and ADDAC knows that. These are tools for the guitarist who gets genuinely excited by the idea of their instrument doing something it was never designed to do. At €120 and €200 respectively, they’re priced for serious curious players, not casual impulse buys. But if that description fits you, they represent something genuinely rare in 2024: a hardware idea that hasn’t been done to death. No app, no plugin, no firmware update — just magnets, transducers, and physics doing something beautiful to your strings.

ADDAC Rotary Exciter & Resonator Clamps

Leave a Reply

Your email address will not be published. Required fields are marked *